Why is my beer cloudy? In a pub it's usually one of four things: the cask hasn't had time to drop bright, the cellar's colder than 11°C, the lines need a proper clean, or the beer's been on too long. The trick is telling which, because the fix for each is different and the wrong fix wastes beer. Pull a half into a clear jug, stand it on the bar for five minutes, and watch what it does.

That's the short version. The rest of this is the full list of causes, how to spot each one from when the cloudiness turns up, and what it costs you if you keep pulling through hoping it clears.

First: is it supposed to be cloudy?

Some beers are meant to be hazy. Wheat beers, a lot of modern IPAs brewed with oats and wheat, and anything sold as unfined. CAMRA's guide to finings puts it well: beer now runs from crystal clear to soup-like, and plenty of brewers skip fining because they want the haze. If the pump clip says hazy or unfined, it's not a fault. Tell the customer, and tell your staff, so nobody pulls a perfectly good cask off sale.

Cask bitter, golden ale and lager are a different story. Customers expect them clear, and they're right to.

The causes, straight from the fault chart

Cask Marque's fault-finding chart lists the reasons cask goes cloudy. I've put them in the order I'd check them.

Why cask ale goes cloudy, and the fix (Cask Marque, sources at the bottom)
CauseWhat's happeningFix
Not settled or not conditionedYeast still in suspension after delivery or tappingLeave the soft peg in another 24 hours. Never serve straight after tapping
Cellar too cold (under 11°C)Chill hazeCheck the cellar thermometer, turn the cooler up
Cellar too warm (over 13°C)Live beer starting to spoilGet the cooling looked at, today
Dirty linesYeast building up in the lineClean every 7 days, agitate the cleaner three times
On sale too longPast its best, often off in taste tooOff sale. Buy sizes you empty in three days
Hard peg left inA vacuum in the line pulls sediment upSoft peg in before you serve
Tilted mid-sessionSediment stirred upTilt only at the end of a session, when over half full

When it's cloudy tells you why

This is the bit that saves time. Don't stare at the glass. Think about when it started.

  • A brand new cask, cloudy from the first pint. It hasn't dropped. Turn it off, soft peg back in, give it another day. Pulling pints through to "clear it" just wastes them.
  • Every beer on the bar is a bit hazy, cask and keg. Look at the lines first. Yeast in dirty lines is the cause Cask Marque calls a major one, and it hits everything on that run at once.
  • The cask's been fine for a day, then goes cloudy near the end. Sediment. Either it's been tilted during service or it's nearly empty. Check nobody tilted it mid-shift.
  • Cloudy and tastes sour, thin or of vinegar. It's gone. Off sale, keep it for the drayman, and see the credit route in my ullage claims guide.
  • Cloudy at the bar, clears as it sits. Chill haze. Your cellar's too cold.
  • Cloudy only after you've changed a cask on a busy night. Check the peg. A hard peg left in the new cask drags sediment up the line.

The five-minute jug test

Here's the quickest way I know to tell the difference. Pull a half into a clean clear jug or a straight glass, put it on the back bar and leave it five minutes.

  • It clears as it warms up: chill haze. Proteins and tannins clump together in the cold and let go again when the beer warms. Harmless, but your cellar is under 11°C. Check it before you touch anything else.
  • Bits drop to the bottom and the beer above clears: disturbed sediment or a cask that hasn't finished settling.
  • It stays cloudy and smells or tastes wrong: old beer, infection or dirty lines. Off sale.
  • It stays cloudy but tastes fine: most likely yeast that hasn't dropped, or a beer that's meant to be hazy. Check the pump clip, then give it time.

Five minutes beats twenty pints down the drip tray guessing.

What a cloudy cask costs

A firkin of Doom Bar is £117.49 on a trade price list I checked on 20 November. That's about £1.63 a pint before you've sold one. Pull six pints through "to see if it clears" and you've poured nearly £10 away, and if it was chill haze all along, not one of those six needed to go.

The bigger cost is the one you don't see. Somebody who gets a cloudy pint and gets told "it's real ale, it's meant to be like that" doesn't argue. They just don't come back. Swap it with no fuss. The law's on their side anyway: drinks have to be of satisfactory quality, and a cloudy pint of a beer that should be clear isn't. Log every swap in your wastage book so the stocktake explains itself instead of showing a loss you can't account for.

Keg lager going cloudy

Keg beer is filtered and doesn't carry yeast like cask, so a cloudy lager is rarer and usually points at the lines or the glass. Clean the line, check the nozzle, and look at the glass itself. A glass that's come out of a glasswasher with a film on it can make a clear pint look hazy. Wipe the outside: if the haze is on the glass, my glass cleaning guide sorts it. If a lager is cloudy and fobbing as well, start with why is my beer fobbing.

Stop it happening

  • Thermometer in the cellar, checked every day. 11 to 13°C. My serving temperature guide covers checking it in the glass too.
  • Lines cleaned every seven days. Agitate the cleaner through at least three times. The waste is real stock, so log it. The sums are in line cleaning and your variance.
  • A sample glass on the stillage. Cask Marque's card says taste and check clarity before you connect a cask, and re-test at the start of every session. Keep a clean glass down there so it actually happens.
  • Tap and settle on time. Tap within two days of venting, never serve straight after tapping. The steps are in how to tap a cask.
  • Order sizes you can empty in three days. If a firkin takes you a week, buy pins.
  • Soft peg in during service, hard peg in at close. Put it on the closing checklist.

Most of this is just a cellar routine done on time. I've put the whole thing on one page in pub cellar management.

Common questions

Why is my cask ale cloudy?

The usual causes are a cask that hasn’t had time to settle, a cellar colder than 11°C (chill haze), yeast build-up in dirty lines, beer that has been on sale too long, a cask disturbed by tilting during service, or a hard peg left in while serving.

What is chill haze?

A harmless haze that forms when proteins and tannins in beer clump together at cold temperatures. In a pub it usually means the cellar is below 11°C. The haze clears as the beer warms up in the glass.

Is cloudy beer safe to drink?

Chill haze and a little disturbed yeast are not harmful, but they are faults in a beer meant to be clear. Beer that is cloudy and tastes sour, vinegary or off has gone and should come off sale.

How long does a cask take to settle?

Cask Marque’s advice is to tap a stillaged cask within two days of venting, never to serve straight after tapping without letting it re-settle, and if it is still cloudy because it is not fully conditioned, to leave the soft peg in for another 24 hours.

Should a pub replace a cloudy pint?

Yes, if the beer is meant to be clear. Drinks must be of satisfactory quality under the Consumer Rights Act 2015, and arguing over one pint costs far more in goodwill than the pint is worth.

Sources

  • Causes of cloudy and hazy cask (on sale too long, cellar under 11°C or over 13°C, lines cleaned incorrectly or infrequently with yeast build-up "a major cause", not fully conditioned so leave the soft peg in another 24 hours, hard peg not removed during service causing a vacuum that disturbs the sediment), lines every 7 days with the solution agitated at least three times, container sizes sold within three days: Cask Marque, What’s wrong with my beer?
  • Cellar 11 to 13°C, tap a stillaged cask within two days of venting, don’t dispense after tapping without time to re-settle, tilt only at the end of a session and only when more than half full, taste and check clarity before connecting, re-test each session for taste, clarity and temperature, seal empty casks: Cask Marque, Cask cellar card (PDF).
  • Chill haze is malt proteins and tannins clumping at cold temperatures, harmless, and goes as the beer warms: Craft Beer & Brewing, Why isn’t my beer clear?
  • Hazy styles and unfined beer, haze from wheat and oats, clarity expected in cask ale and lager: CAMRA, Finings.
  • Goods must be of satisfactory quality: Consumer Rights Act 2015, section 9.
  • Firkin trade price of £117.49 (Doom Bar, Inn Express, checked 20 November 2026) is from my cask ale prices guide. The jug test, the when-is-it-cloudy table and the cost sums are my own rules of thumb built on the Cask Marque causes above.