What temperature should beer be served at? In the glass, cask ale should be 11 to 13°C, standard lager and keg beer 5 to 8°C, and "extra cold" brands 1 to 4°C, give or take a degree. Those are Cask Marque's figures, and the cellar itself should sit at 11 to 13°C all the time.

That's the answer. The useful bit is the next one: most pubs never actually check the beer in the glass, only the dial on the cellar wall. And a warm pint costs you twice. Once in the drip tray when keg fobs, and again when the cask drinker doesn't order a second.

Beer serving temperatures, by type

What the beer should read in the glass (Cask Marque, allow plus or minus 1°C)
BeerIn the glassNotes
Cask ale (real ale)11 to 13°CCellar temperature. It's meant to be cool, not room temperature
Standard lager and keg beer5 to 8°CKeg ales, smooth, cider on keg and standard stout sit in this band unless the brand says otherwise
Extra cold lager and stout1 to 4°CBrands sold as "extra cold" go through a second cooler or a glycol font
The cellar11 to 13°CEvery container, all the time, keg as well as cask

Brand owners set their own dispense spec, so if your brewer's technician has given you a figure for a particular line, that wins. The Irish trade's joint cooling specification, agreed by the brewers and the cooling installers, gives tighter targets for the beer in the glass: 5°C for cold beer, 3°C for extra cold and 0°C for "ice cold", each plus or minus a degree. Same idea, slightly colder, and it says the system has to hit those numbers at the busiest throughput it was designed for. Remember that last bit. It's the reason most pubs get caught out.

Why cask is served warmer than lager

Cask ale is still conditioning in the cellar. The yeast needs that 11 to 13°C to finish the job, and the beer is built to taste of something at that temperature. Adnams puts it plainly in their trade guide: too warm or too cold and you get anything from lack of flavour to pouring flat or fobbing.

What cask isn't is warm. Cask Marque asked cask drinkers about it: 97% were happy with 11 to 13°C, but once the pint went over 14°C satisfaction dropped to 52%. In the same piece they reported that in summer one in three pints of cask was being served above 14°C, and even in January it was one in five. That survey is from 2019, so treat the exact figures as old, but I'd bet the summer problem hasn't gone anywhere.

Worth knowing too: the same Cask Report found more than half of people who say cask is their favourite beer would prefer it cooler than 11°C. That's why some brewers now sell "cool cask" served much colder. If you're losing younger drinkers to lager, the bottom of that 11 to 13°C range is your friend.

What a warm pint costs

Cask Marque, quoting The Publican, says fobbing is the most common fault on beer dispense at 39% of them, with temperature next at 18%. Their own example is one drip tray of fob per tap per day, about a pint and a half. Here's that on today's prices:

Fob at 1.5 pints per tap per day, priced at the £5.34 average pint (my arithmetic)
Keg tapsPints lost a yearAt £5.34 a pint
42,190£11,695
63,285£17,542
105,475£29,237

Not all fob is temperature, mind. Gas, line cleaning and kegs left on too long all play a part, and I've gone through them in why is my beer fobbing. But warm beer is the first thing to rule out, because it shows up in the stocktake looking exactly like a pouring problem.

Check it at the rush, not on a Tuesday morning

Cask Marque says check the cellar temperature daily and every beer in the glass weekly. Most of us do the first and skip the second. Here's how I'd do the weekly one, and the part nobody seems to do.

  1. Get a probe thermometer. The kitchen one is fine if it's clean and you sanitise it.
  2. Pour a half from each line into a glass that's been on the shelf, not straight out of the washer. A hot glass warms the beer and fobs it, so you'd be measuring your glasswasher.
  3. Probe the middle of the glass straight away. Write the figure next to the line on your temperature log.
  4. Do it again on Friday at nine o'clock, or at half time on a big match. This is the one. A remote cooler builds up an ice bank during quiet hours and uses it up when you're flat out. If it's undersized, or the water's low, or the fan's clogged, the beer is perfect at noon and two degrees warm at nine. That's the specification point above: it has to hold the temperature at peak throughput, and you only find out if you test at peak.
  5. Test the first pint after a quiet spell. Beer sitting in the font and the last bit of line warms up. If the first pint after two quiet hours is warm and fobs, that's a pint you're pouring away every quiet afternoon.

If any line reads out of range two weeks running, that's your call to the brewer's technician or your cooling engineer, with the readings written down. They take you a lot more seriously with a log in your hand. My free temperature log sheet has room for it.

Keeping it right in summer

  • Check the cellar cooler is actually running and the room isn't being used as a store with the door propped open.
  • Top up the remote cooler's water where it's meant to be topped up, and leave sealed systems to the engineer.
  • Fit cooling jackets on handpull cylinders. Cask Marque recommends them, and they stop the cask sitting in a warm bar between pulls.
  • Don't stack hot glasses on the back bar on a busy night. Give them a minute.
  • Order cask in sizes you'll sell in three days. A firkin is 72 pints, so that's 24 a day. Slow lines on big casks spend their last day warming up and going off.

One thing to steer clear of: turning the cellar colder to fix warm beer at the bar. If the cellar's at 11 to 13°C and the glass is warm, the fault is between the two, in the python, the cooler or the font. A cellar at 8°C chills the cask too far, and Adnams lists lack of flavour and flat pours as what you get when cask is too cold.

If you sell cask, it's also worth checking you're pouring it properly and that the glasses are clean, because a perfect temperature in a dirty glass still looks like a flat pint. The difference between the two styles is in cask vs keg.

Common questions

What temperature should beer be served at?

Cask ale 11 to 13°C in the glass, standard lager and keg beer 5 to 8°C, and extra cold brands 1 to 4°C, allowing a degree either way. Those are Cask Marque's figures. The cellar should be 11 to 13°C.

Is real ale served warm?

No. It's served at cellar temperature, 11 to 13°C, which is cool. In Cask Marque's survey, 97% of cask drinkers were happy at 11 to 13°C, but satisfaction fell to 52% when the pint went over 14°C.

What temperature should lager be served at in a pub?

5 to 8°C in the glass for standard lager, and 1 to 4°C for extra cold. The brand owner's own dispense spec takes priority if they've given you one.

What temperature should a pub cellar be?

11 to 13°C, all the time. Above 13°C keg beer fobs and cask spoils; much colder and cask doesn't condition properly.

Why is my beer warm at busy times?

Usually the remote cooler can't keep up. It stores cold as an ice bank during quiet spells and uses it up at peak. Check the water level, the fan and the ice bank, and test a pint at your busiest hour so the engineer has a real reading.

Sources

  • In-the-glass temperatures (cask 11 to 13°C, lager and keg 5 to 8°C, extra cold 1 to 4°C, plus or minus 1°C), cellar 11 to 13°C, daily cellar and weekly glass checks, fobbing 39% and temperature 18% of dispense faults (citing The Publican), one drip tray of fob per tap per day equals 1.5 pints: Cask Marque, Beer quality issues.
  • 97% happy at 11 to 13°C, 52% above 14°C, one in three summer pints and one in five January pints above 14°C, cooling jackets on handpull cylinders, more than 56% of cask fans preferring cooler than 11°C (Cask Report): Cask Marque, Cask should be cooler, April 2019.
  • Cask cellar and glass 11 to 13°C, order sizes you can empty within three days: Cask Marque, Cask cellar card (PDF).
  • Too warm or too cold causing lack of flavour, flat pours or fobbing: Adnams, Keeping tip top cask beer.
  • In-glass targets of 5°C cold, 3°C extra cold and 0°C ice cold, and cooling sized to hold them at maximum design throughput: Drinks Ireland | Beer, Cooling Specifications Document (PDF), January 2017. Irish industry specification, used here as a guide.
  • £5.34 average pint: The Morning Advertiser's pint price survey, May 2026, as used in my average price of a pint guide.
  • The fob cost table, the peak-time and first-pint checks and the glass-from-the-shelf tip are my own arithmetic and method.